Husqvarna 701 Supermoto 2017 Owner's Manual page 126

14 WHEELS, TIRES
Main work
–
Check bearing
» If the bearing is damaged or worn:
–
Change the bearing of the rear sprocket carrier.
–
Check rubber dampers
» If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
F00599-10
–
Lay the rear wheel on a workbench with the rear sprocket facing upwards and insert
the wheel spindle in the hub.
–
To check play
hand.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
S01006-10
»
If clearance
–
Change all rubber dampers in the rear hub.
Finishing work
–
Install the rear wheel.
–
Remove the rear of the motorcycle from the wheel stand. (
–
Check the chain tension. (
 .

of the rear hub for damage and wear.

, hold the rear wheel tight and try to turn the rear sprocket with your
 is larger than the specified value:
( p. 121)
p. 91)
≤ 5 mm (≤ 0.2 in)
p. 78)
124