Husqvarna 701 Supermoto 2017 Owner's Manual page 124

14 WHEELS, TIRES
–
Push the rear wheel forward as far as possible and lay the chain on the rear sprocket.
–
Mount wheel spindle
yet.
–
Make sure that chain adjusters
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks
Info
Mount left and right chain adjusters
–
Tighten nut
Guideline
Nut, rear wheel spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
S01005-10 Screw, wheel speed sensor

and chain adjuster

are fitted correctly on adjusting screws

.

in the drill hole.

.
 
. Mount nut , but do not tighten it

in the same position.
M25x1.5 90 Nm (66.4 lbf ft)
M6 6 Nm (4.4 lbf ft)
122

.

.