Husqvarna 701 Supermoto 2017 Owner's Manual page 83

12 SERVICE WORK ON THE CHASSIS
Main work
–
Push dust boots
Info
The dust boots remove dust and coarse dirt particles from the inside fork
tubes. Over time, dirt can accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
Warning
H00400-10
Danger of accidents Oil or grease on the brake discs reduces the braking
effect.
–
–
–
Clean and oil the dust boots and inner fork tubes of both fork legs.
Universal oil spray (
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
 of both fork legs downward.
Always keep the brake discs free of oil and grease.
Clean the brake discs with brake cleaner when necessary.
p. 199)
p. 82)
81