Husqvarna 701 Supermoto 2017 Owner's Manual page 169

18 SERVICE WORK ON THE ENGINE
–
Remove screw plug
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
F00583-10
–
Position oil screen
–
Position the pin wrench through the drilled hole of the screw plug in the opposite sec-
tion of the engine case.
–
Push the oil screen all the way into the engine case.
F00586-10
–
Mount and tighten screw plug
Guideline
Plug, oil screen
F00587-10
 
with oil screen and the O-rings.
 with the O-rings on a pin wrench.

with the O-ring.
M20x1.5
167
15 Nm (11.1 lbf ft)