Husqvarna 701 Supermoto 2017 Owner's Manual page 97

12 SERVICE WORK ON THE CHASSIS
A 0 0 A
B 0 0 0 B
1 2 3
Main work
–
Shift the transmission to idle.
–
Check the rear sprocket and engine sprocket for wear.
» If the rear sprocket or engine sprocket is worn:
–
100132-10
–
Pull at the top part of the chain with the specified weight
Guideline
Weight of chain wear measurement
–
Measure distance
Maximum distance
chain section
»
If the distance
–
16 17 18
400987-10
Change the drivetrain kit.
Info
The engine sprocket, rear sprocket, and chain should always be
replaced together.

of 18 chain rollers in the lower chain section.
Info
Chain wear is not always even, so you should repeat this measurement at dif-
ferent chain positions.

at the longest

is greater than the specified measurement:
Change the drivetrain kit.
 .
15 kg (33 lb.)
272 mm (10.71 in)
95