Husqvarna 701 Supermoto 2017 Owner's Manual page 167

18 SERVICE WORK ON THE ENGINE
Main work
–
Place a suitable container under the engine.
–
Remove oil filler plug
H01066-10
–
Remove oil drain plug
–
Completely drain the engine oil.
F00579-10
–
Thoroughly clean the oil drain plug with magnet.
–
Mount and tighten the oil drain plug with the magnet and a new seal ring.
Guideline
Oil drain plug with magnet
F00580-01

with the O-ring from the clutch cover.
 with the magnet and seal ring.
M12x1.5
165
20 Nm (14.8 lbf ft)