11
TUNING THE CHASSIS
11.10
Checking the riding sag of the shock absorber
–
Measure dimension
–
With another person holding the motorcycle, the rider, wearing full protective cloth-
ing, sits on the seat in a normal sitting position (feet on footrests) and bounces up and
0 0 A
A
down a few times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear axle and the fixed point.
–
Note down the value as dimension
Info
The riding sag is the difference between measurements
–
Check the riding sag.
Riding sag
C
0 0 C
»
If the riding sag differs from the specified measurement:
–
Adjust the riding sag.
400990-10
of rear wheel unloaded. (
.
70... 75 mm (2.76... 2.95 in)
(
p. 75)
p. 70)
and
.
72