Wheels, Tires; Removing The Front Wheel - Husqvarna 701 Supermoto 2017 Owner's Manual

14

WHEELS, TIRES

14.1

Removing the front wheel

Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
Main work
–
Remove screw
–
Remove screws
–
Press back the brake linings with a light lateral tilting of the brake caliper on the brake
disc.
–
Pull the brake caliper carefully back from the brake disc and hang it to one side.
Info
Do not pull the hand brake lever while the brake caliper is removed.
E00023-10
–
Loosen screw
–
Loosen screws
–
Press your hand on screw
–
Remove screw
Warning
Danger of accidents Damaged brake discs reduce the braking effect.
–
S01003-10
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.

and pull wheel speed sensor
 and spacers  .

by several rotations.

.

to push the wheel spindle out of the axle clamp.

.
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
p. 78)
p. 79)

out of the hole.
116