Husqvarna 701 Supermoto 2017 Owner's Manual page 122

14 WHEELS, TIRES
–
Press the brake caliper onto the brake disc by hand in order to push back the brake
piston.
–
Remove screw
–
Remove nut
–
Pull out wheel spindle
with the adjusting screw.
E00025-10
–
Push the rear wheel forward as far as possible and take the chain off the rear
sprocket.
Info
Cover the components to protect them against damage.
–
Holding the rear wheel, withdraw the wheel spindle.
Warning
Danger of accidents Damaged brake discs reduce the braking effect.
E00026-01
–
–
Take the rear wheel out of the swingarm.
Info
Do not operate the foot brake when the rear wheel is removed.

and pull wheel speed sensor

. Remove chain adjuster

to the point where the chain adjuster is no longer in contact
Always lay the wheel down in such a way that the brake disc is not dam-
aged.

out of the hole.

.
120