Mitsubishi Electric MELSEC System Q Installation Manual page 82

4. SSCNET COMMUNICATION DRIVERS
From preceding page
5) The "System Properties" window reappears.
Perform the operations in steps 3) and 4) also for the
other devices.
• SNETP DRIVER (Transient CH. 0)
• SNETP DRIVER (Cyclic CH. 0)
• SNETP DRIVER (Transient CH. 1)*
• SNETP DRIVER (Cyclic CH. 1)*
*Perform operations only when CH. 1 has been
registered in driver registration.
6) Click [OK] to close the "System Properties" window.
7) Choose "Shut Down" in the Start menu to reboot the
personal computer.
The SSCNET communication driver stops after
rebooting.
8) Before removing the interface board, choose [Exit
Windows] in the Start menu to power off the
personal computer.
4 − 29