Mitsubishi Electric MELSEC System Q Installation Manual page 75

4. SSCNET COMMUNICATION DRIVERS
From preceding page
7) The "Edit Memory Range" window appears.
Type "D0000-D1FFF" in the Value field and click
[OK].
*Section 4.4 (12) provides the SSCNET
Communication Driver Setup Memory Base
Address and driver memory range setting table.
Use it for your reference.
8) Click [OK].
9) The "Creating a Forced Configuration" dialog box.
Click [Yes].
This finishes the adjustment of the fast refresh
driver.
4 − 22