Operating Environment - Mitsubishi Electric MELSEC System Q Installation Manual

Motion controller
Hide thumbs Also See for MELSEC System Q:
Table of Contents

Advertisement

2. SYSTEM CONFIGURATION
2.5

Operating Environment

The operating environment is indicated below.
Item
133MHz or more Pentium personal computer where Windows
Computer
NT/98 operates or 233MHz or more Pentium II personal computer
where Windows 2000 operates (PC/AT compatible)
Windows NT 4.0 (Service Pack 2 or later)
Windows 98
Operating system
Windows 2000
• In Windows NT 4.0, the use needs Microsoft Internet Explorer
Required memory
32MB or more recommended (64MB or more for Windows 2000)
Hard disk free space Refer to the table below.
3.5 inch (1.44MB) floppy disk drive
Disk drive
CD-ROM disk drive
Display
Resolution 800×600 dots, 256 or more display colors
The following spaces are required according to the software installed.
Type
SW3RN-GSV13P
SW3RN-GSV22P
SW3RN-GSV43P
SW3RN-GSV51P
SW3RN-CAMP
SW3RN-LADDERP
SW20RN-LADDERP
SW3RN-DOSCP
Standard
SW3RN-SNETP
Custom
(when all are selected)
SW3RN-DOCPRNP
SW20RN-DOCPRNP
POINT
(1) If you have any question as to the operating procedure of Windows in
operating this software, refer to the Windows manual or commercially
available guidebooks.
(2) Depending on the system font size of Windows NT/98/2000, the screen
may not be displayed properly.
Use a small size font.
3.01 or higher.
SW3RNC-GSVE
26MB
27MB
17MB
27MB
1MB
14MB
14MB
8MB
2MB
3MB
25MB
23MB
2 − 8
Description
Size
SW3RNC-GSVHELPE
23MB
30MB
10MB
10MB
2MB
8MB
8MB
2MB
1MB
2MB
3MB

Advertisement

Table of Contents
loading

Table of Contents