Mitsubishi Electric MELSEC System Q Installation Manual page 47

3. INSTALLATION AND UNINSTALLATION
(2) Precautions for use of SW6RN-SNETP Ver. 00B or later
(a) Coexistence of SNETP
SW6RN-SNETP Ver. 00B or later can be installed to coexist with SW3RN-
SNETP.
Table 3.2 SNETP Versions That Can Coexist
Software
Packages
Ver. 00B or later
SW6RN-SNETP
(Ver. 00A cannot coexist)
SW3RN-SNETP Any version
*1: For SW3RN-SNETP Ver. 00G or earlier, however, there are precautions for
installation/uninstallation. Refer to "Section 3.4.6 (2) (d)".
(b) GSV applications compatible with SW6RN-SNETP Ver. 00B or later
Table 3.3 indicates the GSV applications compatible with SW6RN-SNETP
Ver. 00B or later.
Table 3.3 GSV applications compatible with SW6RN-SNETP Ver. 00B or later
Software
Packages
SW6RN-GSV13P
Ver.00B or later
SW6RN-GSV22P
SW6RN-DOSCP Ver.00A or later
(c) Concurrent execution of SW3RN-SNETP and SW6RN-SNETP
You cannot use SW3RN-SNETP and SW6RN-SNETP together.
1) When those programs are started in order of SW3RN-SNETP and
SW6RN-SNETP, SW6RN-SNETP booted is ignored.
2) When the programs are started in order of SW6RN-SNETP and SW3RN-
SNETP (Ver. 00H or later), SW3RN-SNETP booted is ignored.
3) When the programs are started in order of SW6RN-SNETP and SW3RN-
SNETP (Ver. 00G or earlier), SW3RN-SNETP displays the following
message and does not start properly.
Exit from SW3RN-SNETP.
Compatible Version
*1
Compatible Version
3 − 27
Remarks
Dedicated to the Q motion controller.
Incompatible with the applications de-
signed for A motion controllers.
Remarks
When using any of the packages given
on the left, use SW6RN-SNETP Ver.
00B or later.