Mitsubishi Electric MELSEC System Q Installation Manual page 58
Motion controller
Hide thumbs
Also See for MELSEC System Q:
- Structured programming manual (310 pages) ,
- Special instructions manual (316 pages) ,
- User manual (72 pages)
Table of Contents
Advertisement
4. SSCNET COMMUNICATION DRIVERS
From preceding page
5) The left dialog box appears.
<For Windows NT>
Click [No].
Choose "Shut Down" in the Start menu to power off
the personal computer.
After making sure that the power is off, confirm the
switch setting of the interface board and load the
interface board into the personal computer.
After Windows NT has restarted, choosing and
clicking [Programs]-[SWnRNC-GSVE]-[SW3RNC-
GSVE]-[SW3RN-SNETP]-[Start SSCNET Task] in
the Start menu makes SSCNET communication
ready to start.
<For Windows 98>
Click [No].
Choose "Shut Down" in the Start menu to power off
the personal computer.
After making sure that the power is off, confirm the
switch setting of the interface board and load the
interface board into the personal computer.
Restart Windows 98 and register the SSCNET
communication drivers.
For the registration of the SSCNET communication
driver, refer to "4.4 Registering the SSCNET
Communication Drivers".
4 − 5
Advertisement
Table of Contents
