Mitsubishi Electric MELSEC System Q Installation Manual page 56

4. SSCNET COMMUNICATION DRIVERS
From preceding page
4) The left dialog box appears.
<For Windows NT>
• When the interface card is already loaded
Click [Yes].
The personal computer is restarted.
• When the interface card is not yet loaded
Click [No].
Choose "Shut Down" in the Start menu to power
off the personal computer.
After making sure that the power is off, load the
interface card into the personal computer.
<For Windows 98>
Click [Yes].
The personal computer is restarted.
After Windows 98 has restarted, load the interface
card into the personal computer.
IRQ Level, Memory Base Address and I/O Port
Address are automatically set by the plug and play
function of Windows 98.
5) After Windows NT/98 has restarted, choosing and
clicking [Programs]-[SWnRNC-GSVE]-[SW3RNC-
GSVE]-[SW3RN-SNETP]-[Start SSCNET Task] in
the Start menu makes SSCNET communication
ready to start.
4 − 3