Mitsubishi Electric MELSEC System Q Installation Manual page 38

3. INSTALLATION AND UNINSTALLATION
REMARKS
When Windows 98 is used, there are some personal computer models where
the EMS driver will not be installed properly.
If the EMS driver is not installed properly, starting program edit will display the
following screen and edit will not start.
In that case, add an option to the EMS driver of Config.sys to enable edit to
start.
Describe an M[ ] option after the EMS driver and reboot the personal com-
puter.
(In [ ], set any numeral between 1 and 14.)
(Example) device=c:\windows\EMM386.EXE RAM M5
3 − 18