Table of Contents
Advertisement
Chapter 4
5. Configure LAN ports. Windows users are recommended to choose from the first two
types. Fill in
Address Prefix
Tips:
Find
Help
on the management interface to know more about items.
6. Click
Status
to check whether you have successfully set up an IPv6 connection. The
following figure is an example of a successful PPPoE configuration.
Tips:
Visit the
FAQ
section if there is no internet connection.
4 4
Configure the Router in Access Point Mode
In this mode, your router connects to an existing wired or wireless router via an Ethernet
cable and extends the wireless coverage of your existing network. Advanced functions
like NAT, Parental Controls and QoS are not supported in this mode.
Internet
Ethernet1Ethernet2
Ethernet3
Ethernet4
Ethernet
Existing Router
1. Connect the router's Internet port to the existing router's Ethernet port via an
Ethernet cable.
provided by your ISP, and click Save.
Ethernet4
Internet
New Router
Set Up Internet Connection
Clients
21
Advertisement
Table of Contents
