Product Overview; Appearance - TP-Link HC220-G5 User Manual

Chapter 1
1. 1.

Product Overview

The Whole Home Mesh Wi-Fi AP is designed to extend your network coverage. You
can use multiple devices to create a seamless, intelligent and easy-to-configure mesh
network that covers the entire home. The system consists of a controller, and one or
more agents. The controller connects to a wired router, or a modem or gateway, the
agent extends the wireless coverage of your network.
1. 2.

Appearance

The device has an LED that changes its behavior according to its working status, and a
WPS button, three RJ-45 Ethernet ports, a power port, and a RESET button.
You can check the device's working status by following the LED Explanation table.
LED Explanation
Status
Yellow
Flashing yellow
Flashing blue
Fast flashing blue
Blue
Flashing white
White
Flashing red
WPS button
Status LED
Indication
The device is connected to the controller (For agent only).
The device is starting up or resetting.
The device is ready for configuration.
The device is trying to establish a WPS or mesh connection. This process may
take up to two minutes.
The device has been set up as controller, or its wireless/wired connection with
the controller is good, but the internet is unavailable.
The device is upgrading the firmware.
The device is ready and the internet is available.
The device has lost connection with the controller. (For agent only).
Get to Know Your Device
POWER WAN/LAN LAN1 LAN2 RESET
3