Standard Recipe Settings; Filling The Canisters - Animo OptiFresh 1 Manual

3.8 Standard recipe settings

Table 1
1 7
2 8
3 9
4 10 10
5 11 11
6 12 12
Fig. 14
JUG key switch
Decaf cappuccino with sugar
JUG direct choice
Water dispensing button (right)
1-12 = standard = optional
1 2
Recipes Button No.
Coffee 1 1
Coffee with milk
Coffee with sugar
Coffee with sugar & milk
Espresso 2 2
Double espresso 3 3
Hot chocolate 4
Coffee chocolate 5
Cappuccino
Wiener Melange
Hot water 12 12
Cold water
Latte Macchiato
Cappuccino with sugar
Espresso Chocolate
Tea
Espresso with sugar
Chocolate with milk
Hot milk
Decaf
Decaf with milk
Decaf with sugar
Decaf with milk & sugar
Decaf espresso
Decaf cappuccino
Decaf espresso with sugar
Decaf Wiener Melange
Milk coffee
Coffee
Hot water
= special model (only on request)
62

3.9 Filling the canisters

Fill the ingredient canisters with the relevant instant
product according to table 2 below.
3 4
1. Open the device lid (¿ g. 15).
2. Turn the dispensing element into a horizontal position.
3. Move the canister(s) forward and take them out of
the device.
4. Fill the canister(s) with the appropriate products
1 1
(¿ g. 16). See table below.
2 2
Only ¿ ll the wide canister with fresh brew
3
coffee! Your machine can have two narrow
optional fresh brew canisters for decaf coffee.
4
Fill the narrow canisters with the instant
3 5
products as mentioned in the table below
4 6
5. Place the canister(s) back in the right order. Make
sure that the drive mechanism of the canister falls
5 7
over the cog in the back wall and that the fastening
6 8
ridge goes into the hole of the plate (¿ g. 17).
7 9 6. Turn the dispensing element(s) back to their correct
position (¿ g. 18)
8 10
12 12
1
1
2 1
3
1
1
4
07/2009 Rev. 0.9
07/2009 Rev. 0.9
Table 2
1. Fresh brew coffee
1. Fresh brew coffee
3. Instant cocoa
3
1. Fresh brew coffee
3. Instant cocoa
3
4
4. Instant topping
1. Fresh brew coffee
3. Instant cocoa
3
4
5
4. Instant topping
5. Sugar
63
Fig. 15
Fig. 16
Fig. 17
Fig. 18