Dispensing Cups/Goblets; Strength Adjustment; Dispensing Jugs; Jug Volume - Animo OptiFresh 1 Manual

7.3 Dispensing cups/goblets

The machine has separate dispensing points for hot
drinks and water (¿ g. 30).
Hot Hot water
drinks Cold water (option)
See ¿ g. 31:
1. Select your drink.
2. The blue LED above the dispensing point starts
À ashing.
3. Place your cup and press the dispensing button.
4. Your drink is prepared.

7.3.1 Strength adjustment

The machine has strength adjustment.
See ¿ g. 32:
1. Select your drink.
2. The blue LED above the dispensing point starts
À ashing.
3. Coffee strength adjustment?
Press the 'Set' button and set the strength
using the +/- buttons.
4. Place your cup and press the dispensing button.
5. Your drink is prepared.
1
2
3
Fig. 30
COFFEE
MILK & SUGAR
72

7.4 Dispensing jugs

The machine can ¿ ll small thermos jugs. To do this, turn
up the cup tray.
Only persons who have the key of the jug lock can us
the jug function. See ¿ g. 33.
1. Turn the jug lock to the right.
2. Select your drink.
3. The blue LED above the dispensing point starts
À ashing.
4. Place a thermos jug under the dispensing point and
press the dispensing button.
5. Your drink is prepared.
Attention: coffee preparation progress is indicated on
the display. The coffee is made and poured into the
jug per cup.
6. When you are ¿ nished, turn back the jug lock and
retrieve the key.
Fig. 31 Attention: Only buttons with this
pre-programmed for jugs. Drink buttons without this
pictogram cannot be used for jugs. Please consult your
dealer for any deviating button settings.
Emergency stop jug: The dosing of a jug can be
stopped by simply pushing the correction/ stop
button C. After pushing this button, the chosen jug
recipe is cancelled and only one cup is dispensed.

7.4.1 Jug volume

The machine can adjust the jug volume. See ¿ g. 34.
1. Turn the jug lock to the right.
2. Select your drink.
3. The blue LED above the dispensing point starts
À ashing.
4. The display indicates the number of cups to be
made. Volume adjustment? Use the +/- buttons to
increase or decrease the number of cups.
Attention: if the number of cups is set too high, the
jug will overÀ ow! Coffee strength adjustment?
Press the 'Set' button
to set the desired strength.
5. Place a thermos jug under the dispensing point and
press the dispensing button.
6. Your drink is prepared.
7. When you are ¿ nished, turn back the jug lock and
retrieve the key.
Attention: the jug volume adjustment function will not
Fig. 32
work if the machine is set to paid dispensing.
07/2009 Rev. 0.9
07/2009 Rev. 0.9
1
2
3
4
pictogram are
and use the +/- buttons
73
Fig. 33
COFFEE
Fig. 34