Purpose Of Use; Safety Instructions And Danger Warnings; Maintenance - Animo OptiFresh 1 Manual

Purpose of use

This device can only be used for preparing hot drinks.
Use for any other purpose is inadmissible and can be dangerous.
The manufacturer cannot be held liable for any damages caused by use for any other purpose than
what is described here or by incorrect operation.
Service and technical support
For information regarding speci¿ c settings, maintenance and repair work, which is not included
in this document, please contact your dealer. Write down in advance the following data for your
device indicated with a #. The below information can be found on the type plate on your
device.
A - Model indication #
A
B - Article number #
B
C - Machine number #
D - Electrical connection
E - Frequency
D
F - Power
Guarantee provisions
The guarantee provisions that apply to this device are part of the general terms of delivery.
Directives
This device meets the following EEC directives:
EMC 92/31/EEG & RoHs 2002/95/EEG
93/68/EEG WEEE 2002/96/EEG
LVD 73/23/EEG.
Conditions of the environment
Some water will always remain in the heating system. Therefore never place the device in an area
where the temperature can drop below freezing. The operation of this device is guaranteed up to an
ambient temperature of 40°C.
Recommended maintenance products
Descaler : Animo scale remover
Detergent : Animo coffee fur remover
See Chapter 13 for ordering these maintenance products.
Recommended ingredients
Brewer only use Fresh brew coffee
Mixers only use instant products
Animo
Coffee- and teamakingsystems
........................
C
........................ / ...........................
........................ V 50-60Hz ....................W
M A D E I N H O L L A N D
E F
FOOD 1935/2004/EEG
52

Safety instructions and danger warnings

This device meets the prescribed safety provisions.
Individuals can be injured and material damage can be caused by inappropriate use.
Before the device can be used safely, the following warnings and safety instructions must be
oserved:
Instructions for use
Please carefully read these instructions before using the device. It is safer for you and
will prevent damage to the device.
Please adhere to the order of the following actions. Always store these instructions for
use close to the device.
Installation
• Place the device at work top height on a ¿ rm, À at surface so that it can be connected to the mains.
• Plug the device into a safety-grounded power outlet.
• Position the device so that it cannot cause any damage in case of any leakage.
• Never tilt the device. Always position and transport the device upright.
• Some water will always remain in the heating system, so never place the device in a room where
the temperature can fall below freezing.
• Always observe local regulations and use approved materials and parts.
• When reinstalling the device, please follow the 'Installation' chapter.
Use
• Inspect the device before use and check whether it is in any way damaged.
• The device must not be submerged or hosed down.
• Never operate the buttons with a sharp object.
• Keep the operating controls free of dirt and grease.
• If the device is not used for a long time, it is advisable to unplug the device and shut down the
water supply.
Maintenance and solving malfunctions
• Overdue maintenance of the heating system can lead to high repair costs and can render the
guarantees invalid.
• Do not leave the device during maintenance work.
• Have all repairs done by trained, authorised service engineers.
• If the device must be opened up because of faults or (cleaning) work, make sure that it is
unplugged.
• If the safety instructions are not followed, the manufacturer cannot be held responsible for any
resulting damage.
07/2009 Rev. 0.9
07/2009 Rev. 0.9
53