Advance Motion - ICP DAS USA i8094A Getting Started

3.8 Advance Motion

1. 2-axes continuous interpolation of rectangle: Perform2-axes continuous
interpolation of rectangle.
Please refer to Manual "i8094H_Manual_1.3tc.pdf" section 6.4.1, function
i8094H_RECTANGLE() for detail settings.
2. 2-axes continuous interpolation of line:
Initial setting for continuous interpolation of 2-axes line(Symmetrical T-profile).
Please refer to Manual "i8094H_Manual_1.3tc.pdf" section 6.4.2, function
i8094H_LINE_2D_INITIAL() for detail settings.
Perform 2-axes continuous interpolation of line.
Please refer to Manual "i8094H_Manual_1.3tc.pdf" section 6.4.2, function
i8094H_LINE_2D_CONTINUE() for detail settings.
3. 3-axes continuous interpolation of line:
Initial setting for continuous interpolation of line( symmetrical T-profile).
Please refer to Manual "i8094H_Manual_1.3tc.pdf" section 6.4.3, function
i8094H_LINE_3D_INITIAL() for detail settings.
Perform 3-axes continuous interpolation of line.
Please refer to Manual "i8094H_Manual_1.3tc.pdf" section 6.4.3, function
i8094H_LINE_3D_CONTINUE() for detail settings.
4. Others continuous interpolation: Muti-point continuous interpolation, 3-axes Helix
interpolation, 2-axes Ratio motion
Please refer to Manual "i8094H_Manual_1.3tc.pdf" section 6.4.4~6.4.10 for detail
information.
http://www.icpdas.com
I8094A &I8094HGetting Started manual
Ver 1.3-- 48