Signal Connections For Dn-8468Fb - ICP DAS USA i8094A Getting Started

B.5.2 Signal Connections for DN-8468FB
Maintaining signal connections is one of the most important factors in ensuring that your
application system is sending and receiving data correctly.
Pin Assignment for CON1
The I/O connector on the DN-8468FB is a 68-pin SCSI II connector that enables you to connect
to the I-8094 motion card. Fig. 3-2 shows the pin assignment for the 68-pin I/O connector on the
DN-8468FB (or on the I-8094), and refer to Table 3-2, 3-3 for description of each motion I/O
signal.
Fig. 3-2 I/O connector pin assignment for the CON1
I8094A &I8094HGetting Started manual
http://www.icpdas.com Ver 1.3-- 107