ICP DAS USA i8094A Getting Started page 110

TB1
The connector TB1 is 7-pin connector that enables you to connect to the signals of your motor
drivers. Fig.3-3 shows the pin assignment for the 7-pin connector on the DN-8468FB, and the
Table 3-4 shows its I/O connector signal description.
TB2
The connector TB2 is 5-pin connector that enables you to connect to the signals of your motor
drivers. Fig.3-4 shows the pin assignment for the 5-pin connector on the DN-8468FB, and the
Table 3-5 shows its I/O connector signal description.
http://www.icpdas.com
I8094A &I8094HGetting Started manual
Ver 1.3-- 110