Using Sca Feature On The Ip Phone - Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP Phone
Configuring Call Pull Feature
Call pull feature allows users to retrieve an existing call from another shared phone that is in
active or public hold status.
To configure the call pull feature access code via web user interface:
Click on Account->Advanced.
1.
Select the desired account from the pull-down list of Account.
2.
Enter the call pull feature access code (e.g., *11) in the Call Pull Feature Access Code field.
3.
Click Confirm to accept the change.
4.
The phone will dial out "*11" automatically when you tap the CallPull soft key.

Using SCA Feature on the IP Phone

This section provides you with detailed information on using the SIP VP-T49G IP phone in a SCA
Hybrid Key System scenario. In a SCA Hybrid Key System scenario, the status of the line key icon
which associates with a shared line will change. For more information on line key icon indicator,
refer to Icon Instructions
Hybrid Key System scenario:
Placing calls

Answering calls

Placing a call on hold

Retrieving a held call

Barging in an active call

268
on page 18 You can do the following using the IP phone in a SCA
.