Yealink SIP VP-T49G User Manual page 118

User Guide for SIP VP-T49G IP Phone
To configure search source list in dialing via web user interface:
Click on Directory->Setting.
1.
In the Search Source List In Dialing block, select the desired list from the Disabled
2.
column and click
The selected list appears in the Enabled column.
Repeat the step 2 to add more lists to the Enabled column.
3.
(Optional.) To remove a list from the Enabled column, select the desired list and then
4.
click
To adjust the display order of the enabled list, select the desired list, and click
5.
or .
Click Confirm to accept the change.
6.
The touch screen will display search results in the adjusted order.
Search source list in dialing is configurable via web user interface only.
Note
To search for an entry in the enabled search source lists:
Pick up the handset, press the Speakerphone key or tap the line key.
1.
Enter a few continuous characters of the entry's name or continuous numbers of the
2.
entry's phone number (office, mobile or other number).
The entries in the enabled search source lists whose name or phone number matches the
characters entered will appear on the touch screen.
118
.
.