Configuring The Screen Saver - Yealink SIP VP-T49G User Manual

The SIP VP-T49G IP phone supports the file format of custom pictures in the following table:
Format
*.jpg/*.png/*.bmp
Uploading the Custom Picture via Web User Interface
To upload a custom picture via web user interface:
Click on Settings->Preference.
1.
Select Upload Picture from the pull-down list of Screensaver Type.
2.
In the Upload Screensaver field, click Upload File to locate and upload the custom picture
3.
from your local system.
This field appears only if Screensaver Type is set to Upload Picture.
The web user interface prompts "Upload success!". The custom picture appears in
Screensaver list. The first picture in the list is System.jpg. You can only delete the custom
picture by clicking Del in the Screensaver field.
Note You can only upload one custom image at a time via web user interface.

Configuring the Screen Saver

To configure the screen saver wait time via phone user interface:
Tap ->Basic->Display->Screensaver.
1.
Tap the Wait Time(s) field.
2.
Resolution
<=1280*800
Customizing Your Phone
File Size
<=5MB
67