Call Transfer; Blind Transfer - Yealink SIP VP-T49G User Manual

Call Transfer

You can transfer a call to another party in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when the target phone is ringing.

Attended Transfer: Transfer a call with prior consulting.

Before performing a blind transfer (except you use dial number method), make sure that the
transfer mode on DSS key is configured as Blind Transfer. Before performing a semi-attended
transfer or attended transfer (except you use dial number method), make sure that the transfer
mode on DSS key is configured as New Call or Attended Transfer. For more information on
how to configure it, refer to

Blind Transfer

To perform a blind transfer:
Press
1.
Do one of the following:
2.
- Enter the number you want to transfer the call to.
Press
Enter the number you want to transfer the call to.
-
Tap Transfer.
Configuring Transfer Mode on DSS Key
or tap the Transfer soft key during a call.
to complete the transfer.
Basic Phone Features
on page 232.
207