Auto Answer - Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP Phone
phone may not support direct IP dialing.
.
administrator
Allow SIP IP Call
The IP phone supports SIP IP call by default. You can disable the SIP IP call feature, and the IP
phone cannot place or receive SIP IP call.
To configure the allow SIP IP call via phone user interface:
Tap ->Advanced (default password: admin) ->VC Account->SIP IP Call.
1.
Tap the IP Call field.
2.
Tap the desired value in the pop-up dialog box.
3.
Tap the Save soft key.
4.
Allow SIP IP call is configurable via web user interface at the path Account->SIP IP Call.
Allow H.323 IP Call
You can configure H.323 protocol to enable or disable the IP phone to place/receive H.323 IP
call. For more information on how to configure H.323 protocol, refer to
Registration on page 295.

Auto Answer

Cloud Account Auto Answer
You can use auto answer to automatically answer an incoming call on a Cloud line. Auto answer
is configurable on a per-line basis. Auto answer is only applicable when there is no other call in
progress on the phone.
298
F
or more information, contact your system
H.323 Account