Key As Send; Phone Lock - Yealink SIP VP-T49G User Manual

Tap the Save soft key to accept the change or
5.
Administrator password is configurable via web user interface at the path Security->Password.

Key as Send

You can set the "#" key or "*" key to perform as a send key while dialing.
To configure key as send via phone user interface:
Tap ->Features->General.
1.
Tap the Key as Send field.
2.
Tap # or * in the pop-up dialog box, or tap Disabled to disable this feature.
3.
Tap the Save soft key to accept the change or
4.
Key as send is configurable via web user interface at the path Features->General Information.

Phone Lock

You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
When the phone is locked, the following you needed to know:
All keys and screen are locked except the HEADSET key, Volume key, digit keys, # key, * key and
Speakerphone key. You are only allowed to dial emergency numbers, reject incoming calls by
tapping the Reject soft key, answer incoming calls by lifting the handset, pressing the
Speakerphone key, the HEADSET key or tapping the Answer soft key, and end the call by
hanging up the handset, pressing the Speakerphone key or tapping the EndCall soft key.
Note The emergency number setting, if desired, must be made before lock activation. For more
information, refer to Emergency Number on page 155.
Customizing Your Phone
to cancel.
to cancel.
79