Using Blf Feature On The Phone - Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP Phone
Enter the desired pickup code in the Directed Call Pickup Code field.
3.
Click Confirm to accept the change.
4.

Using BLF Feature on the Phone

You can use the BLF key in the following ways:
Place a call to the monitored user.

Transfer a call to the monitored user.

Pick up an incoming call of the monitored user.

Placing a Call to the Monitor User
You can tap a BLF key to dial out the monitored phone number when the monitored line is idle.
To place a call to the monitored user when the IP phone is idle:
Tap the BLF key.
1.
The IP phone dials out the phone number of the monitored user.
Transferring a Call to the Monitored User
When there is already an active call on the IP phone, you can transfer the active call to the
monitored user by tapping the BLF key. The phone handles the active call differently depending
on the configuration of the transfer mode via Dsskey with the BLF key (refer to
Transfer Mode on DSS
Blind Transfer

Attended Transfer

234
Key). The transfer mode on DSS key has the following modes:
Configuring