Backlight - Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP Phone
The default site name is Yealink SIP VP-T49G.
Tap the Save soft key.
3.
Site name is configurable via web user interface at the path Features->General Information.

Backlight

Backlight has three options:
Backlight Active Level: The intensity of the touch screen when the phone is active. You can
change the intensity of the touch screen by dragging the backlight active level slider.
Backlight Inactive Level: The intensity of the touch screen when the phone is inactive. You can
select a low intensity or turn off the backlight.
Backlight Time: The delay time to change the intensity of the touch screen when the phone is
inactive. You can select a desired time to change the intensity or turn on the backlight
permanently.
Always On: Backlight is on permanently.

15s, 30s, 60s, 120s, 300s, 600s or 1800s: Backlight is changed when the phone is inactive

after the designated time (in seconds).
To configure the backlight via phone user interface:
Tap ->Basic->Display->Backlight.
1.
Drag the Backlight Active Level slider.
2.
Tap the Backlight Inactive Level field.
3.
Tap the desired value in the pop-up dialog box.
4.
Tap the Backlight Time field.
5.
72