Hotline - Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP Phone
configure a delay, where the phone will dial out the phone number automatically after the
designated period of time.
To enable the live dialpad via web user interface:
Click on Settings->Preference.
1.
Select Enabled from the pull-down list of Live Dialpad.
2.
Enter the desired delay time in the Inter Digit Time(1~14s) field.
3.
The default delay time is 4.
Click Confirm to accept the change.
4.
Note Live dialpad is configurable via web user interface only.

Hotline

You can dial a hotline number immediately upon lifting the handset, pressing the Speakerphone
key or tapping the line key. You can also configure a delay, where the phone will dial out the
hotline number automatically after a designated period of time.
To configure the hotline number via phone user interface:
Tap ->Features->Hot Line.
1.
Enter the desired number in the Number field.
2.
156