Graco XM 24W626 Operation Manual page 83

Totalizers and Job Number
Use this screen view the grand and batch totals for each
pump and both pumps combined. The units of measure-
ment are displayed on the bottom of the screen and dis-
played in the units of measurement selected during
setup.
Grand total is the amount of material the system has
dispensed during its lifetime. Batch total is the amount of
material dispensed since the last user reset.
A job number can be entered at the beginning of each
spray job. This helps to organize the USB spray log.
Clear Batch Totalizer
To clear the batch totalizer values for A, B, and A+B,
press to set all values to zero.
Icon Function
Displays batch total and grand total for
pump A. The grand total is displayed at
the top, and the batch total is displayed at
the bottom.
Displays batch total and grand total for
pump B. The grand total is displayed at
the top, and the batch total is displayed at
the bottom.
Displays batch total and grand total for
both pumps combined. The grand total is
displayed at the top, and the batch total is
displayed at the bottom.
Displays job number for each spray
period.
Number of hours system has been run-
ning
3A2776H
Appendix A - User Interface Display
Change Job Number
1. Press to highlight the first digit. Press
to change the number and press
to move to the next digit. Press
the number or
Maintenance 1 Screen
Use this screen view setpoints for the amount of mate-
rial that needs to move through both pumps and dosing
valves that will result in a maintenance warning.
Maintenance 2 Screen
Use this screen view number of days between changing
the main incoming air filter before a reminder advisory is
issued.
Reset Maintenance Counter
1. Press and to scroll through and select the
maintenance field to reset.
2. Press to reset the maintenance counter to
zero.
and
to save
to cancel.
and
83