Component Identification
User Interface Display
Main Display Screen Components
NOTE: For detailed screens information, see Appendix A - User Interface Display beginning on page 68.
The following figure calls out the navigational, status, and general informational components of each display screen.
The system ratio mode shows if the mix ratio target is by volume
the system must be calibrated before running. See Pump and Metering Test and Calibration for Ratio by Weight
Mode on page 48.
Current Date and Time
Navigational Bar
F
. 8: Main Display Screen Components (shown with all display features enabled)
IG
16
or weight
. If the weight is crossed out,
Remaining Potlife Time
System Ratio Mode
(Volume/Weight)
Function Display
Go back one screen
3A2776H