Graco XM 24W626 Operation Manual page 22

Setup
e. For Non-Hazardous Location Models, Con-
nect heater power cables (e) for the tank heater
and the flush heater to the terminal blocks. See
F . 16.
IG
Hose B A Tank Flush
PS1
e
F . 16
IG
22
e
For Hazardous Location Models, Connect heater
power cables (e) for the tanks heater the flush heater to
the terminal blocks. See F
F . 17
IG
4. Connect the fluid circulation return hoses.
• The 1/2 in. circulation hose from the dosing
valve connects to the side of the A tank.
• The 3/8 in. circulation hose from the dosing
valve connects to the side of the B tank.
NOTE: Systems that will be used for 1:1 mix ratio mate-
rials need to change some fittings and circulation hoses.
Use parts from kit 24X461 (supplied with your machine).
See manual 334939 for instructions.
. 17.
IG
e
e
3A2776H