O2: Hoa Keypad Keypad Functions - YASKAWA U1000 iQpump MATRIX Drive User Manual

No.
(Addr. Name
Hex)
o1-10 User-Set Display Units
(0520) Maximum Value
o1-11 User-Set Display Units
(0521) Decimal Display
o1-12
(0522)
Home Help Text
Frequency Reference
o1-13
and Frequency Related
(3105)
Monitor Custom Units 1
Frequency Reference
o1-14
and Frequency Related
(3106)
Monitor Custom Units 2
Frequency Reference
o1-15
and Frequency Related
(3107)
Monitor Custom Units 3
<1> Default setting is determined by parameter A1-02, Control Method Selection.
u

o2: HOA Keypad Keypad Functions

No.
(Addr. Name
Hex)
o2-02 STOP Key Function
(0506) Selection
o2-03 User Parameter Default
(0507) Value
o2-04
Drive Model Selection
(508)
Frequency Reference
o2-05
Setting Method
(0509)
Selection
Operation Selection
o2-06
when Digital Operator is
(050A)
Disconnected
Motor Direction at
o2-07
Power Up when Using
(0527)
Operator
o2-09
–
(050D)
Parameter Set Selection
o2-19
Write during Uv
(061F)
o2-30
(1230)
Monitor Position Save
YASKAWA TOEPYAIUPW01A YASKAWA AC Drive - U1000 iQpump Matrix Drive User Manual
LCD Display
These settings define the display values when o1-03 is set to 3.
o1-10 sets the display value that is equal to the maximum output
UserDisp Scaling
frequency.
o1-11 sets the position of the decimal position.
UserDisp Dec Sel
Switches the top line of the Home Screen from the Drive Status
Top Help on Home
to defined Help messages.
0: Disabled
0: Disabled
1: Enabled
1: Enabled
Sets the first character of the customer-specified unit display
Fref Cust Unit 1 when o1-03 is set to 3 and o1-09 is set to 24.
Sets the second character of the customer-specified unit display
Fref Cust Unit 2 when o1-03 is set to 3 and o1-09 is set to 24.
Sets the third character of the customer-specified unit display
Fref Cust Unit 3 when o1-03 is set to 3 and o1-09 is set to 24.
LCD Display
Oper STOP Key 0: Disabled. STOP key is disabled in REMOTE operation.
0: Disabled 1: Enabled. STOP key is always enabled.
1: Enabled
0: No change.
User Default Sel
1: Set defaults. Saves parameter settings as default values for a
0: No Change
User Initialization.
1: Save User Init
2: Clear all. Clears the default settings that have been saved for
2: Clear User Init
a User Initialization.
Enter the drive model. Setting required only if installing a new
Inverter Model # control board.
Oper Ref Method 0: ENTER key must be pressed to enter a frequency reference.
0: Disabled 1: ENTER key is not required. The frequency reference can be
1: Enabled adjusted using the up and down arrow keys only.
Oper Discon Det 0: The drive continues operating if the digital operator is
0: Disabled disconnected.
1: Enabled 1: An oPr fault is triggered and the motor coasts to stop.
This parameter requires assigning drive operation to the digital
For/RevSel@PwrUp
operator.
0: Forward
0: Forward
1: Reverse
1: Reverse
– Factory use.
Selects whether parameter settings can be changed during a
ParameterSet Sel control circuit undervoltage condition. To be used with 24 V
0: Disabled Power Supply Unit Built-in model.
1: Enabled 0: Disabled
1: Enabled
Saves the monitor position and Home Screen quick monitor
selection. When disabled, entering the Monitor Menu jumps the
Mon Pos Save selection to the Monitor number instead of the group number.
0: Disabled
1: Enabled
B.11 o: Operator-Related Settings
Description
Description
Values Page
<1>
Default:
–
Range: 1 to
60000
<1>
Default:
–
Range: 0 to 3
Default: 1
–
Range: 0, 1
Default: 41
–
Range: 20 to 7A
Default: 41
–
Range: 20 to 7A
Default: 41
–
Range: 20 to 7A
Values Page
Default: 1
–
Range: 0, 1
Default: 0
–
Range: 0 to 2
Default:
Determined by –
drive capacity
Default: 0
–
Range: 0, 1
Default: 1
–
Range: 0, 1
Default: 0
–
Range: 0, 1
– –
Default: 0
–
Range: 0, 1
Default: 0
–
Range: 0, 1
B
323