Three-Phase 400 V Class Drive Models 4O0011 To 4O0077 - YASKAWA U1000 iQpump MATRIX Drive User Manual

Low harmonic regenerative pump controller
Hide thumbs Also See for U1000 iQpump MATRIX Drive:
Table of Contents

Advertisement

A.1 Power Ratings
u

Three-Phase 400 V Class Drive Models 4o0011 to 4o0077

Item
Drive Model
Maximum Applicable Motor
<1>
Capacity kW (HP)
Rated Input
Current (A)
Rated Input
Capacity (kVA)
Rated Output
<4> <5>
Current (A)
Input/
Output
Overload Tolerance
Rating
Carrier Frequency
Maximum Output Voltage
(V)
Maximum Output
Frequency (Hz)
Rated Voltage
Rated Frequency
Allowable Voltage
Fluctuation
Power
Allowable Frequency
Supply
Fluctuation
Allowable Phase Power
Supply
Voltage Unbalance
Harmonic Current Distortion
Input Power Factor
<1> The motor capacity (HP) refers to an NEC 4-pole motor. The rated output current of the drive should be equal to or greater than the motor current.
Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> Rated input capacity is calculated with a power line voltage of 480 V × 1.1.
<4> The rated output current of the drive should be equal to or greater than the motor rated current.
<5> Carrier frequency is set to 4 kHz. Current derating is required to raise the carrier frequency.
<6> Commercial power mode results in near zero input harmonics. Existing power conditions and operation mode can affect input harmonics.
266
Table A.3 Power Ratings (Three-Phase 400 V Class)
4o0011
4o0014
5.5 (7.5)
7.5 (10)
10
13
<2>
9
12
<3>
11
14
(Derating may be required for applications that start and stop frequently)
<6>
Specification
4o0021
4o0027
4o0034
11 (15)
15 (20)
18.5 (25)
19
25
31
17
22
28
21
27
34
Rating: 120% of rated output current for 60 s
4 kHz (User adjustable up to 10 kHz. Derating may be required.)
Proportional to input voltage
400 Hz (User-adjustable)
Three-phase 4Aoooo 380 to 500 Vac 50/60 Hz
-15 to 10%
±3% (Frequency fluctuation rate: 1 Hz/100 ms or less)
2% or less
5% or less (IEEE519 compliant)
0.98 or more (During rated operation)
YASKAWA TOEPYAIUPW01A YASKAWA AC Drive - U1000 iQpump Matrix Drive User Manual
4o0040
4o0052
4o0065
22 (30)
30 (40)
37 (50)
36
47
59
33
43
54
40
52
65
<6>
4o0077
45 (60)
70
64
77

Advertisement

Table of Contents
loading

Table of Contents