Hoa Keypad And - YASKAWA U1000 iQpump MATRIX Drive User Manual

3.6 HOA Keypad and Front Cover
3.6 HOA Keypad and Front Cover
Detach the HOA keypad from the drive for remote operation or when opening the front cover to install an option card.
NOTICE: Be sure to remove the HOA keypad prior to opening or reattaching the front cover. Leaving the HOA keypad plugged into the drive
when removing the front cover can result in erroneous operation caused by a poor connection. Firmly fasten the front cover back into place
before reattaching the HOA keypad.
u
Removing/Reattaching the HOA Keypad
n Removing the HOA Keypad
While pressing on the tab located on the right side of the digital operator, pull the HOA keypad forward to remove it from the
drive.
n Reattaching the HOA Keypad
Insert the HOA keypad into the opening in the top cover while aligning it with the notches on the left side of the opening.
Next, press gently on the right side of the keypad until it clicks into place.
u
Removing/Reattaching the Front Cover
n Removing the Front Cover
Drive Models 2 o 0028 to 2 o 0130 and 4 o 0011 to 4 o 0124
After removing the terminal cover and the digital operator, loosen the screw that affixes the front cover. Pinch in on the tabs
found on each side of the front cover, then pull forward to remove it from the drive.
Figure 3.17 Remove the Front Cover (Drive Models 2o0028 to 2o0130 and 4o0011 to 4o0124)
o 0154 to 2 o 0248 and 4 o 0156 to 4 o 0414
Drive Models 2
62
Figure 3.15 Removing the HOA Keypad
Figure 3.16 Reattaching the HOA Keypad
YASKAWA TOEPYAIUPW01A YASKAWA AC Drive - U1000 iQpump Matrix Drive User Manual