Models 2O0154 To 2O0248 And 4O0156 To 4O0414 - YASKAWA U1000 iQpump MATRIX Drive User Manual
Low harmonic regenerative pump controller
Hide thumbs
Also See for U1000 iQpump MATRIX Drive:
- Quick start manual (118 pages) ,
- Technical manual (706 pages) ,
- Quick start quide (26 pages)
Table of Contents
Advertisement
3.5 Terminal Cover
n
Reattaching the Terminal Cover
Power lines and signal wiring should pass through the opening provided.
page 72
and
Wiring the Control Circuit Terminal
Reattach the terminal cover after completing the wiring to the drive and other devices.
<1> Connect the ground wiring first, then the main circuit wiring, and finally the control circuit wiring.
u
Models 2o0154 to 2o0248 and 4o0156 to 4o0414
n
Removing the Terminal Cover
1.
Loosen the screws on the terminal cover, then pull down on the cover.
CAUTION! Do not completely remove the cover screws, just loosen them. If the cover screws are removed completely, the terminal
cover may fall off causing an injury.
2.
Pull forward on the terminal cover to free it from the drive.
60
on page
<1>
Figure 3.11 Reattaching the Terminal Cover
Figure 3.12 Removing the Terminal Cover
Figure 3.13 Removing the Terminal Cover
YASKAWA TOEPYAIUPW01A YASKAWA AC Drive - U1000 iQpump Matrix Drive User Manual
Refer to Wiring the Main Circuit Terminal on
76
for details on wiring.
Advertisement
Chapters
Table of Contents
