Siemens Schweiz AG
Wireless outside sensor AVS13.399
The radio transmitter must be installed inside the building
The radio transmitter's mounting location should be chosen such that batteries
can be easily changed
The outside sensor is to be connected to the radio transmitter via a 2-core cable; the
connections are interchangeable.
Power is supplied by two 1.5 V Alkali batteries type AAA (LR03).
Establish the radio link in the vicinity of the radio module prior to mounting so that all
system components are within easy reach.
Prerequisite for the radio link is that all components receive power, which means that
the radio module must be correctly connected to the basic unit and the batteries must
be correctly installed in the room unit.
Mounting and installation
Battery transit tab
22. November 2006