Table of Contents
Advertisement
Planning
Mounting method
Connections
Dimensions and drilling plan
18/100
Siemens Schweiz AG
HVAC Products
3.5 Room unit QAA55...
The room unit should be located in the main living room while giving consideration to
the following points:
• The place of installation should be chosen such that the sensor can capture the room
temperature as accurately as possible without getting adversely affected by direct
solar radiation or other heat or refrigeration sources (about 1.5 meters above the
floor)
• In the case of wall mounting, there must be sufficient clearance above the unit,
enabling it to be fitted and removed
When the unit is removed from its base, power is disconnected so that the unit is out of
operation.
• The controller may not be exposed to dripping water
4
3
6
5
2
1
96
User Manual
Mounting and installation
1
CL+
BSB data
2
CL-
BSB ground
4,2
2
1
56
60
CE1U2353en
22. November 2006
Hide quick links:
Advertisement
Table of Contents
