Table of Contents
Advertisement
SYSTEM MAINTENANCE AND TROUBLESHOOTING
7.3.6 Port Usage Statistics Clear
Clears the Port Usage Report for use again.
To clear the Port Usage Statistics Report, follow the menu path as shown:
System Administration Top Menu - 2 - 2 - 1
System Reports - System Report Clear - Port Usage Statistics Clear
May I clear a port usage report data? (Y/N) : =
Type [Y] (yes) or [N] (no). If "Y" is entered, the system will clear the data. Wait until "Port
Usage Report Data Cleared!!" appears on the screen before proceeding.
7.3.7 Flash Memory Usage Report
The Flash Memory Usage Report indicates the amount of flash memory storage used and the
flash memory availability in minutes. It also presents the following statistics:
• The number of messages that were recorded by callers and were copied since the last
clearing of this report.
• The number of messages that were copied since the last clearing of this report.
• The number of messages that were deleted by subscribers, and expired and were removed
by the system since the last clearing of this report.
• The number of messages that expired and were removed by the system since the last
clearing of this report.
To select the Flash Memory Usage Report, follow the menu path as shown:
System Administration Top Menu - 2 - 1 - 6
** Flash Memory Usage Report
140
Drive
Avail
1
118 min
FROM : :
3-JAN-2002 9:53 AM
New
MSGs
64
4-JAN-2002 7:46 PM**
Used
(%)
2min
(1)
Cpy
Del
0
6
Exp
1
Installation Manual
Advertisement
Table of Contents
Troubleshooting
