Table of Contents
Advertisement
SYSTEM ADMINISTRATOR'S GUIDE
Parameter
All Calls
Transfer to
Mailbox
Notification Setting
The parameters for the Message Waiting Notification - Device feature is set using this
procedure. A maximum of 3 destinations (Device 1, 2, 3) can be specified per mailbox.
• Class of Service programming determines if the Subscriber is able to use this feature.
• If the destination device is a telephone, the subscriber will be called when he has
message(s), and will have a chance to listen to the message(s).
• If the destination device is a beeper (pager), the subscriber will be notified when he has
message(s). If the beeper (pager) has a display, it is possible to send to it a callback
number. The callback number can be recorded when a caller leaves a message. If he
does not leave a callback number, the System Callback No., or the caller's number if it
is received through a telephone company's Caller ID service, will be sent instead.
To access the proper menu for Message Waiting Notification, follow the menu path
as shown:
System Administration Top Menu - 1 - 1 - 1 - Mailbox No. - 2 - Device No. 1, 2,
or 3.
186
Value Range
(Default)
1. Yes
If this parameter is set to "Yes," all calls routed to the
2. No
extension are automatically forwarded to the extension's
mailbox without ringing the telephone. Forwarding is
(No)
accomplished through the Automated Attendant service.
Callers are permitted to leave a message.
Note: When this feature has been set to "Yes", the mailbox
owner's extension does not necessarily need to exist as a
phone extension of the PBX.
Table 35
Description/Function
Installation Manual
Advertisement
Table of Contents
Troubleshooting
