Panasonic KX-TVP50E Installation Manual page 58

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
a)
If the KX-TVP50 is answering all incoming calls:
b)
If the KX-TVP50 is only answering calls not answered by the operator (Operator
Backup):
c)
If the KX-TVP50 is only answering calls not answered by user extensions:
6.
Connect the jack(s) assigned in Step 3 to the KX-TVP50.
7.
Connect your laptop computer to the KX-TVP50 and start your communication software
(i.e., HyperTerminal, Procomm Plus, Smartcom...).
8.
Disconnect the power from the KX-TVP50 and set the DIP switch on the KX-TVP50 to
position 5.
Only perform this step when initially setting up the system.
58
Exchange Line Mode—Use System Programs [414](Day Mode), [415](Night
Mode), [416](Lunch Mode) to set this parameter. Program all lines DIL to the first
extension of the Voice Mail hunt group. The KX-TA series will allow incoming
outside calls to hunt only if the exchange lines are DIL to the first port of the hunt
group. Lines programmed as Normal do not hunt.
Flexible Ringing Assignment—For each exchange line, use System Programs
[408](Day mode), [409](Night Mode) and [410](Lunch Mode) to enable ringing at
the operator's extension(jack).
Delayed Ringing Assignment — To give the operator time to answer the call before
the VPS picks up, we recommend setting the delay to 3 or 4 rings for each extension
connected to the KX-TVP50. Use System Programs [411](Day Mode), [412](Night
Mode) and [413](Lunch Mode).
Exchange Line Mode — Set the mode for each exchange line to Normal. Use
System Programs [414 ](Day Mode), [415](Night Mode) and [416](Lunch Mode) to
set this parameter.
Table 14 2 Exchange Lines, 2 Ports
Exchange Lines
1
2
Flexible Ringing Assignment — For each exchange line, use System Programs
[408](Day Mode), [409](Night Mode) and [410](Lunch Mode) to enable ringing on
every extension (jack) that you want to have ring.
Delayed Ringing Assignment — To give users time to answer the call before the
VPS picks up, we recommend setting the delay to 3 or 4 rings for each extension
connected to the KX-TVP50. Use System Programs [411](Day Mode), [412](Night
Mode) and [413](Lunch Mode).
Exchange Line Mode — Set the mode for each exchange line to Normal. Use
System Programs [414](Day Mode), [415](Night Mode) and [416](Lunch Mode) to
set this parameter.
Ports
1, 2
1, 2
Installation Manual