Table of Contents
Advertisement
Parameter
Description
Call Transfer
Caller ID Call Routing - Delete
Permits specified Caller ID List numbers to be deleted from the list.
To access the proper menu for Caller ID Call Routing - Delete, follow the menu path
as shown:
System Administration Top Menu - 1 - 4 - 3 - 2 - Caller ID List No. (1-120)
Caller ID Call Routing - Listing
Displays all Caller ID List numbers.
To access the proper menu for Caller ID Call Routing - Listing, follow the menu path
as shown:
System Administration Top Menu - 1 - 4 - 3 -3
Installation Manual
Value Range
(Default)
Up to 20
Enters a name and/or description of the Caller ID number.
characters
Any ASCII character (except \) can be used.
(None)
Note: When nothing is registered in this parameter but
the caller's name is transmitted from the Local Exchange,
the name will be automatically registered in this
parameter. When this is done, an asterisk " " will appear
with the Call Transfer parameter if "PUTD" is enabled
(see 7.2.19 Touchtone Information Display (PUTD)).
For example, you might see this: "Custom 3 ". This
indicates the name was automatically registered in the
VPS.
Custom/Extn./
Specifies the destination to which the call from an
Mbx
assigned Caller ID number is automatically forwarded.
The "Custom" setting (enter"C") enables callers to be
(None)
forwarded to the specified Custom Service menu. The
"Extn." setting (enter "E") enables callers to be forwarded
to the specified extension. The "Mbx" setting (enter "M")
enables callers to leave messages in the specified
mailbox. A System Group Distribution List number can
be specified here instead of a mailbox number.
SYSTEM ADMINISTRATOR'S GUIDE
Table 48
Description/Function
217
Advertisement
Table of Contents
Troubleshooting
