Table of Contents
Advertisement
7.
Date and Time Setting
Screen output:
Enter the time (hour, minute as 2 digits, comma and A or P) and date (day, month and
year in 2 digits).
To go to the next screen, Press ENTER.
8.
Activating the Quick Setup
Screen output:
Quick Setup - Setup
To set up the mailbox and restart, select "Yes."
To cancel and exit, select "No."
1: Yes
To activate the Quick Setup, Press [1]. The VPS begins to change system programming
data.
Screen output:
Quick-Setup
Setup 101
Selecting "No" in the above screen cancels all changes made to this point.
Then "PORT TEST." "SYSTEM SETUP..." and "1...2...3..." appear on the screen one by
one.
Screen output:
Screen output when Quick Setup is finished:
**ON LINE MODE**
>
Press ENTER.
Installation Manual
Quick Setup-Time Setting
Current time is 3:04, PM
Enter new time (HH:MM, AM/PM) : =
Current date is SAT 1-JAN- 1994
Enter new date (DD-MM-YY) : =
2: No
To set up the mailbox and restart, select "Yes."
To cancel and exit, select "No."
1: Yes
PORT TEST ...
SYSTEM SETUP ...
1 ... 2 ... 3 ...
2: No
CUSTOMISING THE SYSTEM
83
Advertisement
Table of Contents
Troubleshooting
