Panasonic KX-TVP50E Installation Manual page 196

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Authorisation
for Message
Notification
Beeper
Callback
No. Entry
Mode
MWL
Notification for
Unreceived
Message
196
Value Range
(Default)
1. Yes If set to "Yes," Subscribers are able to utilise the
2. No Message Waiting Notification feature. The sub-
parameters to be set include Beeper Callback No. Entry
(No)
Mode, MWL Notification for Unreceived Message, and
Device Notification for Unreceived Message. If set to
"No", sub-parameters cannot be assigned.
Note: This parameter in COS No. 1 is set to "Yes" when
the Quick Setup procedure is used to create Subscriber
mailboxes.
1. Caller Select Permits Subscribers to use the Callback Number Entry
2. Without feature.
3. Before
4. After
Caller
5. Disable
Select:
(Disable)
Without:
Before:
After:
Disable:
Note: To utilise this feature, the callback number entry
code must be included in the Subscriber's beeper (pager)
number. When "Disable" is selected or if the caller does
not enter a callback number, "System Callback No." (See
Table 61) will be displayed on the beeper's (pager's)
display. If a caller's number is received through a
telephone company's Caller ID service, the caller's
number will be displayed instead of "System Callback
No."
1. Yes The message waiting lamp will be illuminated when this
2. No parameter has been set to "Yes" and when unplayed
(Yes) messages remain after the Subscriber has accessed the
mailbox for Subscriber service.
Table 38
Description/Function
After recording a message, callers are asked
if they would like to enter a callback
number.
Without recording a message, the caller is
asked to enter the callback number.
Before recording a message, the system
asks the caller to enter the callback number.
After recording a message, the system asks
the caller to enter the callback number.
Disables the Callback Number Entry
feature.
Installation Manual