Kx-Td816, Kx-Td1232 And Kx-Td612 Programming For Inband Integration Via The Manager's Extension - Panasonic KX-TVP50E Installation Manual

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
CAUTION
DO NOT create a mailbox in both VPS for the same extension. Each extension can have a
maximum of 1 mailbox in either VPS. The extension should assign a Voice Mail extension
from the VPS which contains its mailbox as the destination for Call Forwarding and Voice
Mail Transfer. DO NOT assign a Voice Mail extension from the other VPS. For example, if
jack 06 (extension 206) has its mailbox in the VPS1, assign extension 207 or 208 as the
destination, not extension 215 or 216 (see the following diagram).
KX-TA series
3.3.3 KX-TD816, KX-TD1232 and KX-TD612 Programming for
Inband Integration via the Manager's Extension
Select a maximum of 2 extension ports to be connected to the VPS. Plug each extension into a
Voice Mail port.
Go into System Program [602] and assign the Voice Mail extensions to a different extension
group. By default, all extensions are in Extension Group 1. Go into System Program [106] and
assign the new Extension Group to Auto Attendant (AA). Then go into System Program [813]
and assign a floating number to the new Extension Group.
If your PBX is KX-TD612, KX-TD816-3, KX-TD1232-3 or higher software version, program
as follows. Go into System Program [131] and enter the Voice Mail extensions into a hunting
group. Go into System Program [106] and assign the hunting group to Auto Attendant (AA).
Then go into System Program [813] and assign a floating number to the hunting group.
52
Mode) and [413](Lunch Mode).
Exchange Line Mode — Set the mode for each applicable exchange line to Normal.
Use System Programs [414](Day Mode), [415](Night Mode) and [416](Lunch
Mode) to set this parameter.
6
7
8
Group A
15
16
Group B
Extension 206
KX-TVP50 (VPS1)
Mailbox for Extension 206
KX-TVP50 (VPS2)
Port 1
Extension 207
Port 2
Extension 208
Port 1
Extension 215
Port 2
Extension 216
Installation Manual