Panasonic KX-TVP50E Installation Manual page 66

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
10.
Start up completed.
a)
The Power Indicator light stops blinking when the start-up has been successful. (The
delay varies according to the system's condition.)
b)
"**ON LINE MODE**" is displayed.
c)
System prompt [>] is displayed on the screen. To enter system administration, Press
ENTER. All parameters can be set through the menu-driven program.
11.
Go to the System Administration Top Menu. Type [5] and Press ENTER, or Type [3] then
QSET and Press ENTER for Quick Setup and follow the Auto Configuration Instructions.
TEST: Press the INTERCOM button and then [265]. If the VPS
answers, you have a DPT connection.
Set the DIP switch to position 0 after initialisation is complete.
The required programming is complete and the VPS and KX-TD1232 should be able to
communicate through Digital Integration.
When running the Quick Setup command (Section 5 CUSTOMISING THE SYSTEM)
from the VPS, the PBX transmits the extension information automatically. This saves time
when programming the VPS.
66 Installation Manual